How to pack and ship test equipment for calibration
Most damage to instruments happens in transit, not on the bench. A practical checklist for getting your equipment to the lab and back safely.
Every year we receive a small number of instruments that have been damaged on the way to us: cracked displays, bent connectors, broken handles and, occasionally, an instrument that will not power on at all. Almost all of this is avoidable with sensible packing. With collection now covering all seven Emirates, here is our guide to sending instruments safely.
Before you pack
- Back up settings and data. Calibration can involve resetting instruments to defaults. Save setups, waveforms, limit lines and test sequences you want to keep.
- Note any faults. If an instrument has a known problem, an intermittent display or a sticky button, write it down and include it with the shipment. It saves diagnostic time and avoids surprises.
- Remove batteries from instruments that will be in transit for more than a day, unless they are needed for the calibration. Damaged lithium batteries are a fire hazard.
- Decide on accessories. Include probes, leads, sensors and adaptors only if you want them calibrated or if they are needed for calibration. Label everything with your company name.
Packing
Use the original packaging if you have it
Manufacturer packaging is designed for the instrument and is usually the best option. If you have it in storage, use it.
Otherwise, use a proper case or double-boxing
- A hard transit case with foam inserts is ideal for instruments that travel regularly.
- If using cardboard, double-box: put the instrument in a box with at least 5 cm of cushioning on every side, then put that box inside a larger box with more cushioning.
- Avoid loose packing peanuts directly against the instrument; they migrate and get into vents and connectors.
Protect connectors and displays
- Fit dust caps on all RF connectors. A precision connector damaged in transit can cost more to repair than the calibration.
- Place a piece of card over the display to spread any impact.
- Do not wrap cables tightly around the instrument; coil them separately.
Paperwork
Include, inside the box:
- your company name, contact person and phone number,
- a list of instruments with make, model and serial number,
- your purchase order or our quotation number,
- any special requirements, such as test points, accreditation, or turnaround.
When the instruments come back
- Inspect immediately for transit damage and report it to us within 48 hours.
- Check the certificates against the serial numbers.
- Let instruments acclimatise before use, particularly in summer when they may have spent time in a vehicle.
- Check the calibration label and update your equipment register.
If you would rather not deal with any of this, our collection service brings protective cases for common instrument types and handles the packing for you.
