All insights
Practical Guides3 min read

Keeping calibration on schedule when everything else has stopped

Movement restrictions have disrupted maintenance plans across the UAE. Here is how we are keeping instruments in calibration, and how you can avoid a backlog later in the year.

The past two months have changed how almost every business in the UAE operates. Many of our clients have reduced staff on site, postponed maintenance and paused non-essential spending. Calibration is easy to defer when there is so much else to manage, but deferral has consequences that will arrive later in the year.

The backlog problem

Calibration due dates do not move because a project has been paused. Every instrument that slips past its due date this quarter will either need to be calibrated urgently when work resumes, or be quarantined until it is. If every organisation defers at the same time, every lab will face the same surge in demand at the same time.

The instruments most at risk are the ones you need first when operations restart: the multimeters, insulation testers and loop calibrators used for commissioning and maintenance.

What we have changed

To keep work flowing safely, we have introduced:

  • Contactless collection and return. Our driver collects packed instruments from your gate or reception without entering your premises. Paperwork is handled by email.
  • Digital certificates. Certificates are issued as signed PDFs as soon as the calibration is approved, so you do not have to wait for the physical return.
  • Staggered lab shifts. Our engineers work in fixed teams to reduce contact, which has allowed us to maintain our normal turnaround.
  • Cleaning on receipt. Every instrument is wiped down with an appropriate cleaner on arrival and again before it leaves.

What you can do now

If your operations are reduced, this may actually be the best time to calibrate. Instruments that are not being used can be away from site without causing downtime.

  1. Pull a list of everything due in the next six months. Most asset registers can export this in a few minutes.
  2. Separate critical from non-critical. Instruments needed for restart, safety tests and customer deliverables go first.
  3. Send idle instruments now. If a meter is sitting in a locked store, it can be calibrated without anyone missing it.
  4. Document any extensions. If you decide to extend an interval temporarily, record the reason, the risk assessment and who approved it. Auditors will accept a justified, documented extension far more readily than a silent lapse.

A note on interval extensions

Some organisations are extending calibration intervals by a few months to manage cost. That can be reasonable for stable instruments with a good history. It is not reasonable for instruments that have previously been found out of tolerance, or that are used for safety-critical measurements. If you are unsure, call us and we will look at the instrument’s history with you.

We are open, operating safely and ready to help you avoid a rush later in the year.

Start a calibration

Your next calibration is due sooner than you think.

Send us your instrument list and we will come back within one working day with a fixed quote, turnaround date and collection slot.