Building a calibration management programme from scratch
Growing teams often discover they have dozens of instruments and no system. A step-by-step approach to building a calibration programme that runs itself.
It usually starts with an audit finding, a customer questionnaire or a new contract. Someone asks for evidence that your measuring equipment is calibrated, and you discover that while most of it probably is, nobody is quite sure where all the certificates are, or when everything is due. If that sounds familiar, this guide is for you.
Step 1: Find everything
Walk the site and list every instrument used to make a measurement that matters: product acceptance, process control, safety testing, customer reports. Include:
- bench and handheld instruments,
- instruments built into test systems,
- personal instruments that engineers bring from home,
- reference items such as gauge blocks, resistors or check standards.
For each, record make, model, serial number, location and owner.
Step 2: Decide what needs calibrating
Not everything does. For each item, ask whether its readings are relied on to make a decision. If yes, it needs calibration. If no, label it “Indication only” and record it as such. Being explicit about what is excluded is as important as calibrating what is included.
Step 3: Assign unique IDs and labels
Give every instrument in the programme a unique ID, separate from its serial number, and label it. The label should show the ID and the next calibration due date. A simple, consistent format works best, for example PME-EL-0042 for an electrical instrument.
Step 4: Set intervals and requirements
For each instrument, record:
- the calibration interval, starting with the manufacturer’s recommendation or twelve months;
- the accuracy you need, which may be tighter or looser than the manufacturer’s specification;
- any special requirements, such as accredited calibration, specific test points, or a guard-banded decision rule.
Step 5: Choose a register
A spreadsheet works well for up to a few hundred instruments, provided only one person maintains it. Beyond that, or when several people are involved, a dedicated calibration management system or a provider-maintained register is worth considering. Whatever you choose, it should show at a glance what is due, overdue and out of service.
Step 6: Define the process
Write down, in a page or two:
- how instruments are sent for calibration and by whom,
- how certificates are reviewed against requirements on return,
- what happens when an instrument is found out of tolerance,
- how overdue instruments are quarantined,
- how new instruments are added to the register.
Step 7: Schedule and level the load
If everything was bought at the same time, everything falls due at the same time. Spread calibrations across the year where you can, so you are never without too many instruments at once, and so costs are predictable.
Step 8: Review
Once a year, review the programme: how many instruments failed, how many went overdue, whether intervals need adjusting, and whether anything has been missed.
How we can help
For many of our customers, we maintain the register for them, track due dates, send monthly recall lists, and keep a complete archive of certificates. If you are starting from scratch, we are happy to visit, help you build the initial inventory, and set the programme up with you.
